Shop by Brand
Clamp Meters
Datacom and Networking
Ground Tester
Hand Tools
HVAC Equipment and Instruments
Life Sciences Equipment
Megohmmeter
Multimeters
Oscilloscopse
Power Measurement
Power Supplies
Power Tools
Process / Calibration
Safety Testing / Surge Testing
Safety Equipment
Signal Generators / Counters
Soldering Equipment
Spectrum Analyzers
Surveying Equipment
Thermal Imagers
Merk
Katalog
Test Equipment
Inspector Tools
Environmental
Power Tools
Your shopping cart is empty!
![General Tools DSM8930 [DSM8930] Digital Sound Level Meter with Analog Bar Graph](image/cache/wp/gj/Products/General_DSM8930-800x800.webp "General Tools DSM8930 [DSM8930] Digital Sound Level Meter with Analog Bar Graph")
The DSM8930 Digital Sound Level Meter. Please read this user’s manual carefully and thoroughly before using the instrument. The DSM8930 uses an integrated condenser microphone to measure the noise level of an environment or the loudness of a machine, typically in order to comply with health and/or safety rules. The meter has a measurement range of 40 to 130 dB over four ranges, an accuracy of ±2 dB, 2 and a digital display resolution of 0.1dB. Real-time measurements are shown on a green backlit LCD in two forms: as a three- or four-digit dB value, and as a moving vertical line on a horizontal analog bar graph. Several features improve the meter’s versatility. Among them are “A” frequency weighting and “fast” (125 ms) time response. The meter can display real-time readings or the minimum or maximum sound levels measured since being powered on.
Physical features of the DSM8930 include a wind shield ball and an analog output jack for connecting to a chart recorder. The DSM8930 is powered by one “9V” battery (included).
Features:
Note: Prices are not binding , subject to change without prior notice
By completing profiles, we can ensure you get the best service
