Name: DeFelsko PRBRTRH PosiTector RTR Replica Tape Reader Probe Only
Brand: PT. Indomultimeter Test Instrument
Availability: OutOfStock
Rating: 5 (1 reviews)

DeFelsko PRBRTRH PosiTector RTR Replica Tape Reader Probe Only

0 reviews • Write a review

from

Rp.15,254,289

Brand: Defelsko
Part Number: PRBRTRH
Availability: 2 - 4 WEEKS
Last Updated: 09 May 2025

Defelsko

Qty

Add to Cart

Add to Wish List Compare this Product

Tags: Fluke , Basic , Battery , Analyzer

Description

DeFelsko PRBRTRH PosiTector RTR Replica Tape Reader Probe Only. Locate a representative site for measurement. Clean the surface to be tested. We recommend the use of cleaning putty to remove dust, debris, or residual blast media from the surface. Firmly press the putty onto the surface using your fingers, and remove. Select the appropriate grade of replica tape based on the target profile (Coarse or X-Coarse). See tape instructions for assistance. Pull a single adhesive-backed replica tape free of its release paper. A "bull's eye" circle of paper should remain on the release paper (it is not used for measurement). Apply replica tape to blasted surface. Press the adhesive-backed ends of the paper to hold it firmly in place during the burnishing process. Firmly compress replica film using the rounded end of the included stainless steel burnishing tool. Apply sufficient pressure in a circular and x-y rubbing motion to produce a replica with a uniform pebble grain appearance. It normally takes 30 to 60 seconds to fully compress all parts of the film on most surfaces. In general, too much compression is safer than too little. After burnishing is complete, remove the replica tape from the surface. PosiTector gage bodies are compatible with the full range of PosiTector 6000, 200, DPM, IRT, SPG, RTR, SST, SHD, BHI and UTG probes.