• Part Number: GF-203AN
  
• Capacity: 220 g (NTEP)
• Readability: 0.001 g (NTEP 0.01 g)
• Pan Size:  5 x 5" (128 x 128mm)
• Repeatability (std dev): 0.001g
• Linearity: ±0.002 g
• Accuracy immed.following cal: ± 0.010 g
• Super fast Smart-SHS sensor (1 second response time in fast mode)
• NTEP and Measurement Canada approved
• NTEP e=d or switchable to e=10d
• Easy-to-read reverse backlit LCD provides clear and wide-angle visibility even in dimly-lit areas.
• IP65 protection against dust and spills
• Impact shock detection stores potentially damaging loads placed on the balance
• High capacity with high resolution
• Available with either internal (GX) or external (GF) calibration
• RS-232C and bidirectional USB standard
• Ethernet and wireless Bluetooth interfaces optional
• Simple user interface
• Easy to clean
• Robust die-cast aluminum housing
• Flow rate calculation and display available
• 5 year warranty

• Capacity: 220 g (NTEP)
• Readability: 0.001 g (NTEP 0.01 g)
• Pan Size: 5 x 5" (128 x 128mm)
• Repeatability (std dev): 0.001g
• Linearity: ±0.002 g
• Accuracy immed.following cal: ± 0.010 g
• Stabilization time: Approx. 1 sec (approx 0.8 sec for 5 g)
• Sensitivity drift: ±2 ppm / °C (10 °C to 30 °C / 50 °F to 86 °F, when automatic self-calibration is OFF)
• Calibration wt: 50g, 100g, 200g
• Display: Reverse Backlit LCD (Character height: 17.8 mm)
• Display refresh rate: 5 times / second, 10 times / second or 20 times / second
• Units of Measure ii: g (gram), oz (ounces), lb (pound), lb-oz (pound-ounce), ozt (troy ounce), ct (metric carat), mom (momme), dwt (pennyweight), gr (grain), pcs (counting mode), % (percent mode), SG            (specific gravity), and a user-programmable unit
• Counting mode, min unit mass: 0.001g
• Counting mode, # of samples: 5, 10, 25, 50 or 100 pieces
• Percent mode, min 100% ref mass: 0.001g
• Percent mode, min 100% display: 0.01%, 0.1% or 1% (depends on the reference mass stored)
• Operating environ ment: 5 °C to 40 °C / 41 °F to 104 °F, 85% R.H. or less (no condensation)
• Power supply / consumption: AC adapter / approx. 30 VA
• Communication interface: RS-232C and USB
• Overall Dimensions (WxDxH): 212 (W) x 317 (D) x 93 (H) mm / 8.3 (W) x 12.5 (D) x 3.7 (H) in
• Net weight: Approx. 5 kg / 11 lb
• Shipping Weight: 14.3 lbs / 13 x 17 x 11 inches

• (1) GF-203AN Precision Balance
• (1) AC Adapter
• (1) USB Cable

Brochure/Data Sheet

Instruction Manual

Download

Note: Prices are not binding at any time subject to change without prior notice