• Part Number: 215.03
• Clamping diameter 1.06" (27mm)
• Measurement range from 0.5 to 140 ARMS and 100 A DC
• Measures AC+DC signals
• 10 mV/A output
• Automatic compensation for earth's magnetic influence
• NiMH Battery power (8 hour battery life) or USB continuous
• Frequency response from DC to 1 MHz
• Selectable 3 or 30 kHz filter settings
• Push button zero adjust
• LED indicators for power, overload and filter selection
• UL 94 V2 self-extinguishing case
• 600 V CAT II, 300 V CAT III ratings
• Low battery indicator
• Applications:
• Measuring in breaker panels
• Industrial loads
• HVAC
• Residential and commercial sites
• Data logging/recording
• General AC current measurements
• Power measurement applications
• VFD measurements

• Electrical:
• Nominal Range: 100 A AC/DC (140 A peak)
• Measurement Range: 500mA to 140 A AC/100 A DC
• Transformation Ratio: Voltage Output
• Accuracy: 0.5 to 64 A AC/DC: ≤1.5% of Reading + 0.01 A; 64 to 90 A AC/DC: ≤4% of Reading; 90 to 140 A AC/100 A DC: ≤5% of Reading
• Overload: 150 A Continuous
• Load Impedance: 0.25 mΩ (at 400 Hz); 0.628 mΩ (at 1 MHz); In RF: 0.1 µH for a primary transition
• Common Mode Voltage: (600 V Max); At 50 Hz: 3.5 mA/5 mA @ 100 V; At 400 Hz: 25.9 mA/50 mA @ 100 V
• Mechanical:
• Operating Temperature: 14 to 122°F (-10 to 50°C)
• Storage Temperature: -4 to 122°F (-20 to 50°C)
• Safety:
• Electrical: EN 61010-1, Ed 2:2001; EN 61010-2-31 Ed 2:2002; 600 V CAT III, 300 V CAT IV; Pollution Degree 2

• (1) NiMH rechargeable battery
• (1) Mains Adapter
• (1) USB /USB power cable
• (1) 5-language user manual

Brochure/Datasheet

Instruction Manual

Download

Note: Prices are not binding at any time subject to change without prior notice