• Built into waterproof case with IP67 rating
• Simple to use, single, dual-split and three phase power and energy logger
• Four 196A-24-BK AmpFlex Sensors included
• 1000V CAT IV
• Measurement of RMS voltages and currents at 128 times per cycle and stored every second
• Power Measurements: VA, W and var
• Energy Measurements: VAh, Wh (source load) and varh (quadrant indication)
• Updated features in DataView software for configuring real-time communication with a PC and report generation with pre-defined or user defined templates
• USB, LAN, Ethernet and Bluetooth (Class 1 wireless communication, up to 300 ft. away)
• WiFi communication
• Minimal programming required
• Can be configured from front panel, through Dataview control panel or free app
• Satisfies the recommendations of NEC Code 220.87
• Provides all the necessary functions for power and energy data logging for 50Hz, 60Hz, 400Hz and DC distribution systems
• Automatic recognition of the connected current sensors/probes
• Can be powered directly from AC Phase measurement
• Applications:
• Measure efficiency, find areas for potential savings
  
• Track sub-billing occupants for energy costs
  
• Assign energy costs to departments or operations within a department
  
• Track peak demand periods and find opportunities for surcharge reductions
  
• Determine present capacity and circumvent unnecessary electrical expansion costs
  
• Monitor stray voltages and neutral current
  
• Verify the reliability and operation of electrical machinery
  
• Improve response time to solve power related problems
  
• Track energy availability and reliability of supply
  
• Reduce field service time at sub-stations
  
• Baseline studies for system upgrades in high-rise and office buildings
  
• Remote configurations, monitoring and event loading
  

• Sampling Frequency: 128 samples per cycle; 50/60Hz (16 samples / cycle 400Hz)
• Data Storage Rate: 1 per second and 200ms
• Demand Period Storage Rate: User selectable (1, 2, 3, 4, 5, 6, 10, 12, 15, 20, 30 and 60 minutes)
• Recorded Parameters (Single- and Poly-Phase): V, I, W, VA, var, PF, Tan, Wh, VAh, varh, THD (V and I), Individual harmonics (from 1 through 50 per phase); Crest Factor (CF), Cos f / DPF
• Event Log: Tracks and records status changes & error messages along with recorded data
• Front Panel Indicator LEDs: Bluetooth active, recording in progress, phase sequence, overload, battery charging & SD Card status
• Storage Capacity: SD card included / SD cards up to 32 GB formatted FAT32 are supported
• Voltage Inputs: 5 input channels via 4mm safety banana jacks
• Current Inputs: 4 input channels via custom 4 pin jacks that accept AEMC ® probes & sensors
• Voltage Measurement:
• 50/60Hz:
• Range: 42.5 to 69Hz
  
• Resolution/Accuracy*:  ±0.1Hz
  
• Single-Phase RMS Voltages:
• Range: 10 to 1000Vrms
  
• Resolution/Accuracy*: 0.1V/±0.2% Rdg ± 0.2V
  
• Phase-to-Phase RMS Voltages
• Range: 17 to 600Vrms
  
• Resolution/Accuracy*: 0.1 to 1V/±0.2% Rdg ± 0.4V
  
• 400Hz
• Range: 340 to 460Hz:
  
• Resolution/Accuracy*: –
  
• Single-Phase RMS Voltages
• Range: 10 to 600Vrms
  
• Resolution/Accuracy*:  0.1V/±1% Rdg ± 1V
  
• Phase-to-Phase RMS Voltages: 
• Range: 17 to 1200Vrms
  
• Resolution/Accuracy*: 0.1 to 1V/±1% Rdg ± 1V
  
• DC
• Range: 10 to 1000V
  
• Resolution/Accuracy*: 0.1V/±1% Rdg ± 3V (typical)
  
• Current Measurement: 196A*** –
• Nominal range - probe dependent
• Range: 200mA to 10,000A
  
• Resolution/Accuracy*: –
  
• CT Ratios: Programmable from 1:1 to 25,000:1 (probe dependent)
• Active Power (P)*
• Range: 0.001W
  
• Resolution/Accuracy*: ±0.5% Rdg ± 0.005% Pnom
  
• Reactive Power (Q)*
• Range: 0.001var
  
• Resolution/Accuracy*: ±1% Rdg ± 0.01% Qnom
  
• Apparent Power (S)*:
• Range:0.001VA
  
• Resolution/Accuracy*: ±0.5% Rdg ± 0.005% Snom
  
• Power Factor: 
• Range: 0.001
  
• Resolution/Accuracy*:  ± 0.05
  
• Tangent (active/reactive power ratio)
• Range: 0.001
  
• Resolution/Accuracy*: ± 0.02
  
• Active Energy (EP)
• Range: 1Wh
  
• Resolution/Accuracy*: ±0.5% Rdg
  
• Reactive Energy (EQ)
• Range: 1varh
  
• Resolution/Accuracy*: ±2% Rdg
  
• Apparent Energy (ES)
• Range:  1VAh
  
• Resolution/Accuracy*: ±0.5% Rdg
  
• THD: ± 655%
• Individual Harmonics: 1 to 50 displayed in percentage; 1 to 7 at 400Hz
• External Supply: 110V/250V (10%) @ 50/60Hz; 400Hz
• Power From Phase Measurement: 100V to 1000V AC
• Back-Up Power Source/ Charge Time: Rechargeable 8.4V NiMH battery pack / Approx. 5 hours
• Battery Life: 30 minutes minimum, 60 minutes typical
• Communication Ports: USB 2.0, Ethernet (RJ45), Wireless Bluetooth Class 1 **, Wi-Fi
• Dimension/Weight: 10.6 x 7.1 x 9.65" (270 x 180 x 245mm) / 8.8lbs (4kg)
• Case: Polycarbonate UL94 V1 rated
• Display Type:  4.2 x 3.3" (107 x 84mm), four line, monochrome, backlit LCD with adjustable brightness and contrast
• Operating Temperature /Relative Humidity: -4° to 122°F (-20° to 50°C) / 45 to 75%RH
• Storage Temperature With Batteries: -40° to 95°F (-40° to 35°C from 0 to 95%HR); -40° to 158°F (-40° to 70°C from 0 to 75%HR)
• Safety Rating: Complies w/ IEC 61010-1:Ed3, IEC 61010-2-030:Ed1 for 1000V CAT IV, Pollution Degree 4 closed (3 when open)
• Index of Protection: IP67 with cover closed

• (1) Large classic tool bag
• (4) 24" AmpFlex A196-24-BK sensors
• (1) 5 ft USB cable
• (5) Black test leads and alligator clips
• (1) Power adapter with power cord
• (12) Color-coded ID markers
• (1) Safety card
• (1) 8GB SD-Card installed
• (1) USB-SD-Card adapter
• (1) 9.6V NiMh battery installed
• (1) Quick start user guide
• (1) USB stick supplied with DataView software and user manual

Brochure/Datasheet

Instruction Manual

AEMC Data Loggers Dataview Software (74.4 MB)

Note: Prices are not binding at any time subject to change without prior notice