• Two operating modes available
• 1) PC-Hosted Mode: Programmer is controlled by a PC via USB port
• 2) Stand-Alone Mode: Operatin is performed via the keyboard, LCD, and an optional SD card without a PC attached. Porject file(s) should be downloaded onto the SD card from a PC prior to Stand-Alone operation
• Supports ISP programming of devices with I2C, SPI, CAN, UART, BDM, MW, JTAG, or any other serial port.
• Built with on-board Flash memory and a slot for SD card.
• Built with LCD display and Keypad for stand-alone operation. Customized BIOS and user interface will be provided.
• An external AC power adapter will provide power to the programmer and target device. There will be no power applied from the target equipment.
• DLL or Virtual Com communication command set available for third party application (optional).
• Over-current protection circuit limits power to the target device.
• Serial number is written within the builtin flash memory, which will be displayed when powered on.
• 2 year warranty 

Specifications

• (1) SuperPro IS01 Programmer with an ISP cable
• (1) AC adapter
• (1) Software CD
• (1) USB Cable
• (1) SD card for stand-alone operation
• 91) Parallel  Cable

Brochure/Datasheet

Instruction manual

Download

Note: Prices are not binding at any time subject to change without prior notice