HDE DVM5000V [DVM-5000V] Digital Low Voltage Phasing Voltmeter, 10V - 5,000V

The DigiVolt-5000V is a compact digital voltmeter and phasing instrument designed to measure voltages from 10 Volts up to 5,000 Volts. The DVM-5000V can be used on secondary and primary voltage systems. The two-stick design allows accurate, low voltage measurements to be taken beyond the arc flash exposure distances required by NFPA 70E Standards, when used with the required applicable length hotsticks.

To comply with OSHA standards for testing the voltmeter on a known voltage source before and after each use - as stated in CFR 1910.133, Section (b) (2) (iv) (B) - the PT-500 Voltmeter ProofTesteris available (sold separately).

The DVM-5000V can be used in both overhead and underground applications. The digital meter displays 4-digits,showing the true RMS voltage on the conductor.No decimalpointsshowon the display, only the voltage reading. For example, while measuring 240 VAC the display will read “0240”, where 4kV will be displayed as “4000”. Fixed contact probes on the end of each stick allow for direct contact voltage measurements.

Applications:

• Measure voltage on the secondary side oftransformers
• Measure voltage in the primary side oftransformers up to 4800V system voltage
• Measure voltage on metersockets
• Measure voltage on meter boxes
• Measure voltage on conductors on both overhead and underground systems
• Verify a conductoris de-energized priorto grounding
• Determine if multiple conductors are in or out-of-phase
• Discharge underground cables and other equipment that hold capacitive charges