Delta Ohm HD208 Compact Data Logger Temperature / Relative Humidity / Dew Point Monitoring

The data loggers of the series HD208 are compact instruments for monitoring temperature, relative humidity (RH) and dew point temperature. Usable in a wide spectrum of applications, are available in various models:

• With 1 channel for temperature only (depending on the model, the sensor can be internal, external fixed or external with cable).

• With 1 channel for temperature and relative humidity (combined probe fixed or with cable).

All models can be supplied with or without LCD display.

The logging function is extremely versatile; logging can be started and stopped manually, by means of the front buttons, or the start and stop date and time of acquisition can be programmed. The delayed start capability allows starting the logging with a configurable delay time after pressing the button for the manual start.

For each quantity detected, two configurable alarm thresholds can alert the user if the measure exceeds the configured parameters.

The instrument automatically generates, after logging, a PDF report with charts of the variables collected and a CSV file with all measurements logged. The PDF and CSV files can then be copied to the PC via the USB port, without any dedicated software: the instrument is recognized as a USB flash drive.

The application software HD35AP-S, downloadable from Delta OHM website, allows the configuration of the instrument, the real-time monitor of the measurements and the transfer of the acquired data into a database. The connection to the PC does not require any installation of USB drivers, thereby ensuring compatibility with all versions of the Windows® operating system.

The HD35AP-CFR21 application software option allows the use of security features of the recorded data and configuration of the instrument in response to FDA 21 CFR part 11 recommendations. Powered by a 3.6 V non rechargeable lithium-thionyl chloride battery (Li-SOCl2). The sensors are pre-calibrated and require no further calibration by the user. If necessary, the user can perform a new calibration using the HD35AP-S application software. All versions can be ACCREDIA certified, upon quote.