Checkline MTT-10 [MTT-10-300-T] Digital Thickness Gauge for Textiles and Non-Wovens with 300 mm Jaw Depth

300 Series for 300mm Jaw Depth (12")
500 Series for 500mm Jaw Depth (20")
Measuring Range: 0 - 10 mm (0 - 0.400")
with option 25MM: 0 - 25 mm (0 - 1.000") 
Resolution: 0.01 mm (0.001")
The MTT-10 is a digital dial thickness gauge designed for the accurate thickness measurement of non-woven fabrics, textiles, felts, geomaterials, paper, floor coverings, leather, foils, etc. It is offered with two different jaw depths providing clearance to measure wide samples. The combination of feeler diameter and load weight generate a specific "pressure" as required by many standardized test standard necessary in order to get reliable and repeatable measurements such as fabric, felt, textiles and similar compressible materials.

The instrument does not meet the DIN, EN and ISO standards.

The feeler shape and the pressure are corresponding to DIN EN ISO 5084 standards. This low-cost thickness gauge is suitable for quick comparison measurements.

Features:

---

• According to DIN EN ISO 5084 (Measuring face 20 cm² / Druck 0.1 kPa and 1 kPa)
•  For fleece according to DIN EN ISO 9073-2 (Measuring face 25 cm² / pressure 0.1 kPa and 0.5 kPa)
• For geomaterials according to DIN EN ISO 964-1 (Measuring face 25 cm² / pressure 2 kPa and 20 kPa,

      not 200 kPa)

• For non-woven textiles according to DIN 53855 (Measuring face 10 cm² und 25 cm² / various pressures

      according to standard)

What's In The Box:

---

• (1) Digital Thickness Gauge
• (1) Operating instructions 

Brochure/Datasheet

---

Instruction manual

Note: Prices are not binding , subject to change without prior notice