• 10,000-count display
• Current up to 100 A AC or DC
• Resolution: 1mA
• Clamping diameter: 12.5 mm
• Analogue output

• Value measurements: DC and AC voltages, AC and DC current, resistance, continuity test.
• Display: 4 digits (9 999 points)
• Polarity indication:“ – “ sign.
• Ranges: Automatic range selection.
• Additional selectable functions: Automatic shutdown (active or not). Display of capacity being exceeded Maximum measurement (Peak). Measurement storage (Data Hold).  Zero mode, relative measurements.
• Battery indication: Low charge battery symbol .
• Sampling frequency: Approx. 2 times per second.
• Analog output: For ACA and DCA ranges. 10 mV/A (20 kHz ±3 dB). Accuracy : ±4.5% reading +0.5 mV. Output impedance: approx 3 kΩ. Overload protection: 600 V RMS.
• Use: 0 to 40°C (32°F - 122°F). RH < 80%, no condensation.
• Storage: -10°C to 60°C (14 – 140°F); RH <70%, no condensation and with the battery removed.
• Battery: 2 1.5V AAA type batteries.
• Autonomy (when measuring Volts DC): 45 hours with alkaline battery.
• Dimensions and weight: 202 x 70 x 34 mm / 7.95 x 2.76 x 1.33 inch. (L x l x H). 180 g (with batteries)
• Pollution level: 2
• IEC IEC: 61010-1, IEC 61010-2-033, 300 V, CAT III
• Delivered with the instrument: 2 1.5V AAA type batteries. Two power cables. One set of operating instructions. A carrying case

• (2) 1.5V AAA type batteries.
• (2) Two power cables.
• (1) One set of operating instructions
• (1) Carrying case

Brochure/Datasheet

Instruction Manual

Download

Note: Prices are not binding at any time subject to change without prior notice