• Waterproof - The HI99192 is a waterproof meter rated IP67 for immersion in up to one meter of water for 30 minutes.
• Automatic Calibration - One or two-point calibration is automatic to two selectable buffer sets.
• Automatic Temperature Compensation – An integrated temperature sensor allows for automatic temperature compensation of pH measurements.
• Sensor Check - Using the pH‐mV range the user can check the sensor status by reading the mV reading in fresh buffers. At room temperature (25 oC/77oF) the reading should be +/- 30 mV in pH 7.01 and greater than 150 mV difference between pH 7.01 and 4.01.
• Multi-Level LCD Display - The split-level LCD displays both pH and temperature readings, along with indicators for reading stability, battery percentage, and probe condition.
• Probe Condition Indicator - The probe condition indicator is based on the offset and slope characteristic of the electrode. There are 5 bars ranging from all 5 indicating the probe is in excellent condition and 1 bar indicating the probe should be cleaned or replaced.
• Battery Error Prevention System - The meter will automatically shut off if there isn’t enough power to obtain an accurate measurement.
• Battery Life Indicator - The battery percent level is displayed at start up alerting the user to the remaining battery power that is available.

Specifications

• (1) FC2153 pH/temperature probe
• (1) HI70004 pH 4.01 buffer solution sachet (20 mL)
• (1) HI70007 pH 7.01 buffer solution sachet (20 mL)
• (2) HI700601 electrode cleaning solution sachets (20 mL)
• (1)100 ml beaker
• (3) 1.5V AAA batteries
• (1) Calibration certificates for both meter and probe
• (1) Instruction manual
• (1) Rugged thermoformed carrying case.

Brochure/Datasheet

Instruction manual

Download

Note: Prices are not binding at any time subject to change without prior notice