• pH, ORP, conductivity & ISE parameters
• Parameter available in both channels
• channel 2 accepts a 4-20mA sensor
• Multi-point calibration for conductivity and ISE
• 1 point calibration for pH
• Five control/alarm relays
• Temperature or flow totalizer output

• Probe Parameters:
• Sensor:
• pH/ORP/ISE: 6-Wire Differential or Combination
• Conductivity: 4-Wire contacting : Any cell constant between 0.01 and 100
• 4-20mA: Current sinking Current source
• Flow: Pulse output: Paddle-wheel, Magmeter
• Temperature Elements:
• pH/ORP/ISE: 100, 1000 Ω RTD 300, 3000 Ω NTC or none
• Conductivity: 100, 1000 Ω RTD 300, 3000 Ω NTC
• 4-20mA: N/A
• Flow: Pulse output: N/A
• Available Inputs:
• pH/ORP/ISE: 1 and 2
• Conductivity: 1 and 2
• 4-20mA: 1 and 2
• Flow: Pulse output: Only 1
• Measurement Range (Process): 
• pH/ORP/ISE: pH 0 to 14 pH ORP -2000 to +2000 ISE 0-1000 ppm
• Conductivity: pH 0 to 14 pH ORP -2000 to +2000 ISE 0-1000 ppm
• 4-20mA: -9999 to +9999
• Flow: 0 to 999 in any units
• Measurement Range (Temperature):
• pH/ORP/ISE: -20 to 120 °C
• Conductivity: -20 to 120 °C
• 4-20mA: -N/A
• Flow: Flow Totalizer 0 to 999 in any units
• Temperature Compensation: 
• pH/ORP/ISE: Automatic or none
• Conductivity: Automatic or Manual -20 to 120 °C
• 4-20mA: Sensor specific
• Flow: Display Flow Totalizer
• Outputs:
• Analog:
• Three 4-20 mA outputs
• Optically isolated. (Max Load - 800 Ω)
• Scalable 4-20mA with PID (Process or Temperature)
• Relays:
• 2 SPDT
• 8A @ 120 VAC or 30 VDC (resistive)
• 4A @ 120 VAC or 30 VDC (inductive)
• 2 SPST
• 5A @ 250 VAC or 30 VDC (resistive load)
• 2A @ 250 VAC or 30 VDC (inductive load)
• Relay Modes:
•  Rising/Falling/In Range.
• Options: Relay Delay, Cycle, Overfeed Timer, Override
• All relays can be triggered by process temperature or flow totalizer
• Ratings:
• Ingress Protection: NEMA 4X
• Electrical: UL (US and Canada) and CE
• Max. Power Input: 0.3 A @ 115 VAC or 20 W
• Temperature: -20 to 70 °C
• Humidity: 0 to 90% Relative Humidity, non-condensing
• Physical: 
• Mounting: Wall mount, panel mount with kit provided. pipe mount with optional kit
• Dimensions: Front cover: 5.5”x5.5” (14 cm x 14 cm). Depth: 5” (13 cm)
• Power: 120/240 VAC, 50 or 60 Hz
• Weight: 2 lbs
• Protection: NEMA 4X
• Panel Cut-out:  5.4” x 5.4” (138 x 138 mm) full DIN

• (1) Main Menu
• (1) Instruction Manual

Brochure/Datasheet

Instruction Manual

Download

Note: Prices are not binding at any time subject to change without prior notice