• pH, ORP, conductivity & flow parameters available
• Highly visible large backlit LCD display
• Flexible and easy calibration, including multi-point conductivity calibration for acids and bases
• Two 4-20mA process output with range scaling and PID Control
• Universal mounting hardware for surface, panel and pipe mounting
• Compatible with AquaMetrix models 60-series differential pH/ORP sensors, 500-series
• combination style pH/ORP sensors, AS/
• AM-series conductivity sensors, and most pulsed flow sensors
• Temperature or flow totalizer output
• Three control/alarm relays with temperature or flow totalizer output option

• Probe Parameters:
• Sensor: 
• pH: 6-Wire Differential or Combination
• ORP:  6-Wire Differential or Combination
• Conductivity: 4-Wire contacting : Any cell constant between 0.01 and 100
• Flow: Pulse output: Paddle-wheel, Magmeter
• Temperature Elements:
• pH: 100, 1000 Ω RTD 300, 3000 Ω NTC or none
• ORP:  100, 1000 Ω RTD 300, 3000 Ω NTC or none
• Conductivity: 100, 1000 Ω RTD 300, 3000 Ω NTC
• Flow: n/a
• Sensor Input:
• pH: -600 to +600 mV
• ORP:  -999 to +999 mV
• Conductivity: 0 to 9999 Ω
• Flow: 0 to 2000 Hz
• Measurement Range (Process): 
• pH: 0 to 14 pH
• ORP: 1000 to +1000mV
• Conductivity: 0.055 to 500,000 µS/cm (Depending on the cell constant)
• Flow: 0 to 999 in any units
• Measurement Range (Temperature): 
• pH: -20 to 120 °C
• ORP:  -20 to 120 °C
• Conductivity: -20 to 120 °C
• Flow: Flow Totalizer
• 0 to 999 in any units
• Temperature Compensation:
• pH: Automatic or none
• ORP:  Display temperature
• Conductivity:Automatic or Manual -20 to 120 °C
• Flow: Display Flow Totalizer
• Outputs:
• Analog: Two 4-20 mA outputs; Scalable 4-20mA with PID (Process); Scalable 4-20mA (Process or Temperature); Optically isolated. Max Load - 800 Ω
• Relays: 3 Dry contact relay with snubber circuit; 10A @ 120/240 VAC or 8A @ 30 VDC (Resistive Load); 5A @ 120/240 VAC or 4A @30 VDC (Inductive load)
• Relay Modes:  Rising/Falling/In Range.; Options: Relay Delay, Cycle, Overfeed Timer, Override; One relay can be triggered by temperature or flow totalizer
• Ratings: 
• Ingress Protection: NEMA 4X
• Electrical: ETL (US and Canada) and CE pending
• Max. Power Input: 0.2 A @ 115 VAC or 15 W
• Temperature: -20 to 70 °C
• Humidity: 0 to 90% Relative Humidity, non-condensing
• Physical: 
  
• Mounting: Wall mount, panel mount with kit provided. pipe mount with optional kit
• Dimensions: Front cover: 5.5”x5.5” (14 cm x 14 cm). Depth: 5” (13 cm)
• Power: 120/240 VAC, 50 or 60 Hz
• Weight: 2 lbs
• Protection: NEMA 4X
• Panel Cut-out: 5.4” x 5.4” (138 x 138 mm) full DIN

• (1) Main unit
• (1) Instruction Manual

Brochure/Datasheet

Instruction Manual

Download

Note: Prices are not binding at any time subject to change without prior notice