• Cost-effective
• Compact and convenient handheld design
• Stable and Precise Carrier Frequency and Amplitude
• Output is spectrally clean
• Carriers drop out with low battery (no sagging)
• It can be used with the XR-3 equipped with a cable/air tuner module. (XR-CA-01 or XR-CA-02)

• RF Carrier Type (each): Frequencies can be adjusted in 5 kHz increments, Continuous Wave (CW)
• Frequency Ranges:  Channel 1: 5 MHz to 50 MHz; Channel 2: 50 MHz to 204 MHz
• Frequency Accuracy: Greater than 0.01% or 1.0 kHz
• Amplitude Stability: ± 0.2 dB
• Spectral Purity; at least -50 dBc
• Amplitude Output Level: Maximum Output: +50 dBmV (110 dBuV); Adjustable output: range of 30dB, between 20dBmV and 50dBmV: 0.5dB adjustable steps
• Two Independent Channels: The output level can be adjusted separately for each channel
• Output Impedance; 75Ω
• Operating Temperature Range: 0* F to 120* F (-18* C to +50* C)
• Power DC; Internal, rechargeable LiPo battery, 3.7V, 3450mAh
• Operation Time per Battery: Approximately 3 hours continuous after full charge at full output
• Low Battery Indicator: Can be monitored on the LCD display
• Low Battery Cutoff: Turns off carriers when battery power is insufficient
• Enclosure Type, Size,Weight: ABS Plastic, 6.1”W x 3.5”H x 1.3”D (155 x 88 x 33 mm), 9.6 oz. (272 g)

• (1) Five-volt power cube - 3A
• (1) Instruction Manual

Brochure/Datasheet

Instruction Manual

Download

Note: Prices are not binding at any time subject to change without prior notice