• Adash America A4802 [4802SS] Sensor Simulator for Calibration and System Testing

Adash America A4802 [4802SS] Sensor Simulator for Calibration and System Testing

Not yet rated Write a review
Adash America
Rp.25,568,500
Availability:
4 - 6 WEEKS
Product Code:
A4950
Brand:
Adash America
Update Terakhir:
13 May 2017
  • Free delivery

  • Money back guarantee

Share

Sensor simulator for calibration and system testing. Generates a signal in acceleration and velocity in two frequencies and amplitudes. Connect to analyzers or permanent monitoring systems to verify calibration.
Connect any vibration meter or analyzer to A4802 Sensor Simulator and check whether it measures correctly. The Sensor Simulator generates stable voltage signal on 80 Hz and 8 kHz. Setup your device to 100 mV/g input sensor sensitivity and you should see value of 10 mm/s in velocity measurement and 0.5 g in acceleration measurement.

Sensor simulator is a great help for measurement systems cables and connectors inspection. There is a trouble if the LED indication blinks while you are stressing the cable or its connectors. It is a sign of bad connection between analyzer and Sensor Simulator.



  • Generates sine test signal for systems checks
  • Checks the function of the measuring system
  • Checks the correct calibration of the measuring system
  • Checks the correct function of cables (on-line systems)
  • Checks ICP powering

  • RMS Output:
    • 51.2 mV / 80 Hz + 50 mV / 8 kHz
    • 5.02 m/s2 / 80 Hz + 4.9 m/s2 / 8 kHz
    • 0.51 g / 80 Hz + 0.50 g / 8 kHz
    • 10 mm/s / 80 Hz
  • Connectors: BNC, MIL C5015
  • Indication: ON/OFF , ICP, charging
  • Supply: Lithium polymer battery 320mAh 3.7V
  • Dimensions: 90 x 35 x 60 mm
  • Weigh: 135 g
  • Protection: IP 20

  • (1) Instruction Manual

Download

Note: Prices are not binding at any time subject to change without prior notice