• -76 to 320°F (-60 to 160°C) temp range
• ±0.04°C drift rate
• Low stem conduction
• 316L SST sheath
• 100Ω nominal resistance
• Choose 9 or 12 inch probe length
• 0.187 inch (4.75mm) diameter w/9in
• 0.25 inch (6.35mm) diameter w/12in

• Temperature Range: -60 °C to 160 °C
• Resistance at 0 °C: Nominal 100 Ω
• Temperature Coefficient: 0.00385 Ω/ Ω/°C
• Accuracy: ±0.05 °C over the full range
• Drift: ±0.04 °C at 0 °C after 100 hours at 160 °C
• Short Term Stability: ±0.01 °C
• Thermal Shock: ±0.01 °C after 10 times thermal cycles from minimum to maximum temperatures
• Hysteresis: <=0.01 °C
• Self-heating: 50 mW/°C
• Response Time: 5 seconds for 63% response to step change in water moving at 3 feet per second
• Measurement Current: 0.5 mA or 1 mA
• Sensor Length: 30 mm
• Sensor Location: 5 mm from tip
• Insulation Resistance: >1000 MΩ at room temperature
• Sheath Material: 316 Stainless Steel
• Dimension: 1610-12: 0.25 inch X 12 inch (6.35 mm X 305 mm); 1610-9: 0.187 inch X 9 inch (4.75 mm X 229 mm)
• External Leads: Teflontm – insulated copper wire, 4 leads, 2.5 meters
• Handle Dimension: 1610-12: 15 mm (OD) X 65 mm (L); 1610-9: 10 mm (OD) X 50 mm (L)
• Handle Temperature Range*: -50 °C to 160 °C
• Optional Calibration: NIST traceable calibration and data available per request: 1610-12: Ordering # 5017
•  *Handle temperature outside this range will cause damage to the probe.

• (1) Wooden Carrying Case
• (1) Instruction Manual

Brochure/Datasheet

Instruction Manual

Download

Note: Prices are not binding at any time subject to change without prior notice