• Part Number: 2113.49
• Measurement range of 100mA to 2000AAC
• Large jaw opening accommodates conductors up to two 500MCM conductors
• Ergonomic design and easy operation
• Conforms to EN 61010, 600V Cat. III safety standard
• Low phase shift for power measurements
• Available with mA or mV output signals
• Designed for DMMs, recorders, loggers, oscilloscopes, power and harmonic meters
• CE Mark

• Operating Range:
• Current Range: 100mA to 1200 Arms (2000A peak)
• Frequency Range: 1Hz to 100kHz (@ -3dB) See typical response curves
• Common Mode Voltage: 600VAC
• Crest Factor: £6
• Current Overload: 1200A for 40 min ON, 20 min OFF
• Current Overload: 
• Range Value: 1mV/A (1V at 1000A), 10mV/A (1V at 100A), 100mV/A (1V at 10Arms)
• Overload: 1200A for 40 min ON, 20 min OFF duty cycle, 20A continuous 12A continuous
• Load Impedance: 1MW @ 47pF
• Open Secondary Voltage: < 25V by limiting circuit
• Reference Conditions; 23°C ±3°K, 20 to 75% RH, 48 to 65Hz, external magnetic field <40A/m, no DC component, no external current carrying conductor,       test sample centered. Load impedance 1MW/47pF
• Working Voltage: 600V, Cat. III
• Influence of Adjacent Conductor: <0.2mA/AAC
• Influence of Conductor Position: 0.02% of Reading @ 50/60Hz
• Influence of Frequency:
• Range: 1mV/A, 10mV/A
• Range Value: 10 to 1000Hz, 1 to 10kHz, 10 to 50kHz, 50 to 100kHz, 10 to 1000Hz, 1 to 10kHz
• Range: 10mV/A, 100mV/A
• Influence of Humidity: 10 to 90%: £0.1%
• Output Signal: 
• Range Value: 1mV/A, 10mV/A, 100mV/A
• Output Signal: 1A to 2000A peak, 0.1A to 200A peak, 10mA to 20A peak
• Accuracy:
• Current Range: 1mV/A (1V at 1000A), 10mV/A (1V at 100A), 100mV/A (1V at 10Arms)
• Accuracy: Per IEC 185-26-27
• Mechanical Specifications:
• Altitude: Operating: 0 to 2000m; Non-operating: 0 to 12Km
• Colors: Dark gray handles with red jaws
• Dimensions: 4.37 x 8.50 x 1.77" (111 x 216 x 45mm)
• Drop Test: 1m (IEC 68-2-32)
• Jaw Opening: 2.25" (57mm) max
• Material: Handles: Polycarbonate +ABS Gray: UL 94 V0; Jaws: Polycarbonate, Red: UL 94 V0
• Maximum Bus Bar Size: 1.95 x 0.19" (50 x 5mm)
• Maximum Cable Diameter: 2.05" (52mm)
• Mechanical Shock: 100g (IEC 68-2-27)
• Operating Temperature: 14° to 122°F (-10° to 50°C)
• Operating Relative Humidity: 0 to 85% @ 35°C
• Output: 6 ft (2m) insulated lead with insulated BNC Connector
• Protection Index (IP): IP 40 (IEC 529)
• Impact Test: IK04 0.5 J EN50102
• Storage Temperature: -4° to 158°F (-20° to 70°C)
• Vibration: Test per IEC 68-2-6
• Vibration: 
• Range Value: 5 to 15Hz, 15 to 25Hz, 25 to 55Hz
• Vibration; Amplitude: 0.15 mm per IEC 68-2-6, Amplitude: 1 mm per IEC 68-2-6 Amplitude : 0.25 mm per IEC 68-2-6
• Weight: 1.21 lbs (550g)
• External Influences: 
• Influence of Temperature: £0.15% per 10K°
• Safety Reference Specifications:
• Safety Ratings: EN 61010-2-32
• Agency Approvals: CE Mark

• (1) SR661 AC Current Probe
• (1) Instruction manual

Brochure/Datasheet

Instruction Manual

Download

Note: Prices are not binding at any time subject to change without prior notice