• Part Number: 2129.86
• AC/DC Current Probe
• The probe is designed to meet the latest safety and performance standards.
• The probe’s hook-shaped jaws enable you to “pry” into or “hook” onto cables (it will accept 2 x 500 MCM) or small bus bars.
• The output of the probe is 10mV/A.
• No battery is required; the probe operates via voltage provided by the Model 6292. The probe has a proportional mV output for direct reading on the Model 6292.

• Meter Compatibility: AEMC 6292
• Maximum Clamping Diameter: One 1.18” (30mm) or two 0.95” (24mm) or two bus bars 1.2 x 0.4” (31.5 x 10mm)
• Current Range: 50ADC
• Measurement Range: 1 to 50ADC
• Accuracy:  1.5%R ± 0.2A
• Output: 5 ft (1.5m) lead with 4-conductor shielded cable with 5-pin XLR connector
• Power Source: Powered by AEMC 6292
• Operating Temperature: 14° to +131°F  (-10° to +55°C); 90% RH
• Storage Temperature: -40° to +176°F  (-40° to +80°C)
• Dimensions (HxWxD): 8.8 x 3.82 x 173” (224 x 97 x 44mm)
• Weight: 15 oz (440g)
• Pollution Degree: 2
• Ingress Protection: IP 30
• EMC:  EN50081-1 Class B, EN50082-2 Electrostatic discharge, IEC 1000-4-2
• Safety Compliance: EN 61010-2-32, 600V CAT III

• (1) MR6292  [2129.86] AC/DC Current Probe
• (1) Instruction manual

Brochure/Datasheet

Instruction Manual

Download

Note: Prices are not binding at any time subject to change without prior notice