• Part Number: 1200.85
• Maximum Conductor Size: Cables: One 1.5" (39mm) or two 1" (25.4mm)
• Current Range: 0.5 to 100AAC, 150ADC & 0.5 to 1000AAC, 1400ADC
• Output Signal: 10mV/A & 1mV/A via a 6.5ft (2m) lead BNC cable
• Accuracy 50/60Hz: ≤1.5% @ 100A & ≤2.5% @ 800A
• Frequency Range: DC to 30kHz (-3dB) (depending of current value)
• Jaw shape enables users to clamp on to cables or small busbars
• Powered by battery or standard external 5V power supply via micro-USB connector
• Automatic Zero DC reset function
• Auto Power Off enable/disable function
• Millivolt output compatible with most equipment and instruments
• Battery life up to 50 hours
• Safety rating 600V CATIII

• Maximum Conductor Size: 1.53” (39mm) or 2 bus bar 1.96 x 0.19” (50 x 5mm)
• Current Range: 0.5 to 100AAC, 150ADC & 0.5 to 1000AAC, 1400ADC
• Output Signal: 10mV/A & 1mV/A via a 6.5ft (2m) lead BNC cable
• Accuracy 50/60Hz: ≤1.5% @ 100A & ≤2.5% @ 800A
• Frequency Range: DC to 30kHz (-3dB) (depending of current value)
• Phase Shift At 50Hz: ≤2°@ 100A & ≤1.5° @ 800A
• Load Impedance: >1MΩ and ≤100pF
• Overload: 3000ADC or 1000AAC continuous for < 1kHz
• Zero Adjust: Automatic on both ranges
• Power Supply: 9V alkaline Battery (NEDA 1060A, 6LR61) or 5V DC Micro-USB type B
• Battery Life: 50H typical
• Low Battery Indication: Green LED blinking
• Overload Indication: Red LED on when measurement > than selected range
• Dimensions (H x W x D): 9.31 x 3.82 x 1.73” (236.5 x 97 x 44mm)
• Weight (with Battery): 1.15lbs (520g)
• Operating Temperature: 14° to +131°F (-10 to +55°C)
• Storage Temperature: -40° to +176°F (-40 to +80°C)
• Relative Humidity: Up to 85% @ 35°C
• Ingress Protection (Ip); IP 40
• EMC : EN 61326-1
• Safety Compliance: IEC 61010-1, EN 61010-2-32, Pollution Degree 2, 600V CAT III

• (1) MR527 AC/DC Current Probe
• (1) 9V Battery
• (1) Multi-language safety data sheet
• (1) User manual

Brochure/Datasheet

Instruction Manual

Download

Note: Prices are not binding at any time subject to change without prior notice