• Besantek BST-LAN10 LAN Cable Tester

Besantek BST-LAN10 LAN Cable Tester

Not yet rated Tulis ulasan
Rp.2.650.000
Ketersediaan:
3 - 4 MINGGU
Kode Produk:
LAN10
Merk:
BESANTEK

Produk ini memiliki jumlah minimum 5
  • Free delivery

  • Money back guarantee

Share

The BESANTEK BST-LAN10 LAN Cable tester is a newly designed tool that can easily test the correct pin configuration of the RJ45/RJ11 modular cables, 10/100 base-T cable and Token Ring cable etc. By comparing one transmitting end and the corresponding receiving end, the BST-LAN10 LAN cable tester also can test installed cables far away by using the remote receiving unit. The BST-LAN10 provides the variety for wiring check such as cable continuity, open status, short status and miss-wired. 

Loopback test: Plug one end of the testing cable into the RJ45 jack of sourcing end on the master unit and another end of the testing cable into the RJ45 jack of receiving end on the master unit.Press the ON/OFF button, the master unit will start a sequential scanning process if the master unit is in " auto-scanning " mode.Press the ON/OFF button, the pin1 LED lamps of the LED indicators will be alight if the master unit is in " manual-scanning " mode.Note: When the battery power is low, the testing results may not be correct. Please replace with a new battery.You can choose a auto-scanning mode or a manual scanning mode by pressing the " AUTO " button or the " MANU " button.The lock function is available in " auto-scanning " mode.When the loop is " OPEN ", you will hear the sound of the buzzer. 

Remote Test: Plug one end of the testing cable into the RJ45 jack of sourcing end on the master unit and another end of the testing cable into the RJ45 jack of the remote receiving unit, then make test.Read the testing results from LED indicator on the remote receiving unit.
Features:


  • Designed for RJ45/RJ11 modular cables,10/100 base-T cable and token ring cable.
  • The LAN cable tester can verify cable continuity, open, short circuit and miss-wired.
  • The remote receiving unit is available for installed cables far away either on the wall plates or on the patch panels.
  • Auto and manual scan functions.
  • Ground wire test.
  • Lock status function.
  • Buzzer sound warning for wire status.
  • Display: LED indication for wire status.
  • Accessories: Instruction Manual, BNC testing cables, self-test cable, carry case, battery, multi-wire testing cables (optional).

What's In The Box:
  • (1) Instruction Manual
  • (1) BNC Testing Cables
  • (1) Self-Test Cable
  • (1) Carry Case
  • (1) Battery

Brochure/Datasheet


Instruction manual


    Catatan: Harga tidak mengikat, sewaktu waktu bisa berubah tanpa pemberitahuan dahulu

    Tulis ulasan