• Nomor Suku Cadang: HPC41-30PSI-BXX
• Jumlah Sensor: 1 sensor
• Tipe Tekanan Pertama: PSI
• Kisaran tekanan pertama: 0 hingga 30 psi
• Tipe Tekanan Kedua: Tidak tersedia dengan sensor tunggal
• Kisaran tekanan kedua: Tidak tersedia dengan sensor tunggal
• Modul Barometrik: Tanpa
• Adaptor: 1/4 NPT fitting tekanan jantan
• Sensor Suhu: Tidak termasuk
• Sistem Pompa: Sistem B (pneumatik) -25 inHg hingga 30 psi/-0,85 hingga 2 bar
• Cairan: Bukan pilihan dengan pemilihan sistem pompa saat ini
• Tas Pembawa: Aluminium
• 0,035% Akurasi Membaca
• Pengukur, Absolut, dan Tekanan Diferensial hingga 15.000 psi / 1000 bar / 100 MPa
• Antarmuka "Non-Menu" Kesederhanaan Tingkat Lanjut
• Ukur & Sumber mA dengan Daya Loop Eksternal atau Catu Daya Internal 24 VDC
• Termometer Akurasi Tinggi dengan Teknologi "True Ohm".
• Simpan & Ingat Layar yang Digunakan Sebelumnya
• Pilihan Daya Fleksibel Termasuk Isi Ulang

• ACCURACY • PRESSURE MEASUREMENT:
• psi (Gauge Pressure)
• 18 to 28° C: 0 to 30% of Range: ±(0.01% of Full Scale); 30 to 110% of Range: ±(0.035% of Reading); Vacuum* : ±(0.05% of Full Scale**)
• -20 to 50° C: 0 to 30% of Range: ±(0.015% of Full Scale); 30 to 110% of Range: ±(0.050% of Reading); Vacuum* : ±(0.05% of Full Scale**)
• * Applies to 300 psi and lower ranges only. Vacuum Range = -14.5 psi.
• ** Full Scale is the numerical value of the positive pressure range.
• psiA (Absolute Pressure with BARO Option):
• All absolute accuracies are equivalent to the gauge pressure accuracies, except as noted below.
• 30 psi Range: Gauge Accuracy +0.005 psiA
• 100 psi Range: Gauge Accuracy +0.002 psiA
• DIFFERENTIAL PRESSURE:
• The Tare function can improve differential pressure measurement uncertainties. Requires the use of an equalizing valve
• Without tare function:
• ±(0.05% of static line pressure reading)
• PRESSURE SENSOR:
• Wetted Materials: (wrench tight) 316 stainless steel (finger tight) 316 stainless steel and Viton® (internal o-ring)
• Diaphragm Seal Fluid: Silicone Oil
• Connection: Crystal CPF Female
• BAROMETRIC REFERENCE (BARO):
• Accuracy: ± 0.00725 psi, ± 0.5 mbar
• Range: 10.153 to 15.954 psiA,
• 700.0 to 1100.0mbarA
• Units and Resolution: psi: 0.001; inHg: 0.001; mmHg: 0.01; mbar: 0.1
• Pressure Connection: Cylindrical sensor fitting of 5.8mm OD. A flexible 4.8 mm [3/16"] ID tube is recommended to connect for calibration.
• CURRENT & VOLTAGE MEASUREMENT:
• Connection: 4 mm jacks
• Maximum Voltage: 45 VDC
• Current (mA) Input
• Accuracy: ±(0.015% of rdg + 0.002 mA)
• mA Range: 0 to 55 mA
• Percent Range: 0-20, 4-20, 10-50
• Max Allowable Current: 60 mA
• Resolution: 0.001 mA or 0.01%
• Units: mA and %
• Input Resistance: < 17.2 Ω
• Voltage Burden @ 20mA: < 0.35 V
• Voltage Burden @ 50mA: < 0.86 V
• HART Resistor: 250 Ω
• Current (mA) Output
• Accuracy: ± (0.015 of rdg + 0.002 mA)
• Range: 0 to 25 mA*
• Step Time: 1 to 999 seconds
• Ramp Time: 5 to 999 seconds
• Voltage (VDC) Input
• Accuracy: ±(0.015 % of rdg + 2 mV)
• Range: 0 to 30 VDC
• Resolution: 0.001 VDC
• Input Impedance: > 1 MOhm
• Loop Power
• Fixed Output: 24 VDC
• Voltage Output Accuracy: ± 10%
• Maximum Output Current: 25 mA
• Switch Test
• Switch Type: Dry Contact
• Closed State Resistance: < 1K Ω
• Open State Resistance: > 100K Ω
• Sample Rate: 10 Hz
• TEMPERATURE MEASUREMENT:
• Accuracy: ±(0.015% of rdg) + 0.02 Ohm
• Range: 0 – 400 Ohms
• Resolution: 0.01 on all scales
• Units: °C, K, °F, R, Ω
• TCR: 0.003850 Ω/Ω/°C (IEC 60751)
• Wiring: 2-, 3-, and 4-wire support
• Connection: Lemo Plug, 1S Series, 304 insert configuration
• DATA/COMMUNICATION:
• Digital Interface: mini-USB
• DISPLAY:
• Screen: 320 x 240 pixel graphical display
• Display Rate: 3 readings/second (standard)
• 10 readings/second (switch test and peak hi/lo modes)
• POWER:
• Type Cell Voltage:
• Alkaline 1.5 V
• NiMH 1.2 V
• Lithium 1.5 V
• Battery Life:
• >12 hours non-sourcing
• >8 hours when sourcing 12 mA
• Recharge Time: 16 hours
• * (Using Eneloop 2100 mA hr)
• ENCLOSURE:
• Weight: 689 g (24.3 oz)
• Rating: IP65
• Housing: Machined Aluminum
• Keypad and Labels: UV Resistant Silicone
• OPERATING TEMPERATURE:
• Temperature Range: -20 to 50° C (-4 to 122° F)
• STORAGE TEMPERATURE:
• Temperature Range: -40 to 75° C (-40 to 167° F)
• SPECIAL FEATURES:
• The following requires the use of our free CrystalControl software:
• Remove: Unwanted pressure units.
• Auto Off: Adjust automatic shutoff settings.
• Calibration: Calibrate the modules and enter new Calibrated On and Calibration Due dates.
• User Defined Unit: Define and display any pressure units not included, or to use the gauge to display force,
• level or other pressure related parameters.

• (1) HPC41 Kalibrator Tekanan
• (1) T-965-CPF Pompa Tangan (pneumatik) -25 inHg hingga 30 psi/-0,85 hingga 2 bar
• (1) Kotak Aluminium
• (1) Sertifikat Kalibrasi Terakreditasi ISO 17025, NIST Dapat Dilacak
• (4) baterai AA
• (1) Adaptor NPT
• (1) Sepatu Pelindung
• (1) Test Lead, merah dan hitam dengan klip
• (1) Tali velco
• (1) Panduan pengguna
• (1) Kabel Mini USB

Brosur/Lembar Data

Instruksi Manual

Unduh

Catatan: Harga tidak mengikat sewaktu waktu dapat berubah tanpa pemberitahuan lebih dahulu