The Model 201 Water Level Temperature (WLT) Meter is ideal
for measuring static water levels, as well as profiling temperature
in wells, boreholes, tanks and open water.
Accurate temperature measurements are clearly displayed on an
LCD readout on the faceplate, from -20ºC to +125ºC.
Water level and probe depth measurements are read off the
Solinst durable PVDF flat tape. Tape lengths are available up to
2000 ft (600 m).
Water Level & Temperature Probe The 201 Probe is made of high quality 316 stainless steel.
The pressure-proof probe can be submerged to 1000 ft (300 m).
The zero measurement point on the probe is close to the tip,
keeping water displacement at a minimum.
The temperature sensor is located at the stainless steel tip of the
probe, however, since the probe body acts as a heat sink, best
accuracy is obtained when the probe is completely submerged.
The tape seal plug design allows the probe to be easily replaced,
if required.
Laser Marked PVDF Flat Tape The WLT Meter uses extremely durable PVDF flat tape. The
tape is non-stretch and has a dog bone design that prevents
adherence to wet surfaces. The tape reels smoothly, remains
flexible and hangs straight, regardless of temperature. It is also
easy to repair and splice.
The 3/8" (10 mm) wide tape has permanent laser markings
every 1/100 ft. or each millimeter, traceable to NIST and EU
measurement standards.
LM2: Feet and tenths: with markings every 1/100 ft.
LM3: Meters and centimeters: with markings every mm
Features:
Accurately measure temperature from -20ºC to +125ºC
Tape lengths to 2000 ft (600 m)
Corrosion and chemical-resistant PVDF flat tape
Standard 9V alkaline battery gives 90 hours of use
Automatic shut-off after 8 minutes
Sturdy, standalone reel with ergonomic handle and brake
No user calibration is required
What's In The Box:
(1) Water level meter and tape guide
(1) Cable marked every millimeter
(1) Stainless steel probe 5/8" dia., 5.08" long (16 mm x 129 mm).