AGL LS100 [824632] Laser Receiver

The AGL LS-100 laser receiver easily picks up the signal of your red beam rotary laser outdoors. It features dual LCDs, large laser beam detection window and audio output for instant visual grade information. This laser detector also includes a reversible clamp with bubble vial to ensure solid mounting to either rectangular or oval rods.

Dual LCD and LEDs
With front and read LCD display, the LS100 provides clear visual readings. The three bright LEDs can be used as a reference for the receiver's position, while the grade information arrows show high, on-grade and low and breaks up the grade information into 11 different channels.

Selectable Accuracies
This laser detector allows you to work with a fine, medium or coarse bandwidth. It also has a last beam strike memory and low battery indication.

Strobe Rejection
The LS100 receiver detects only the laser beam and ignores the flash from strong strobes on the jobsite for accurate results.

Long Battery Life
With an IP67 rating, the LS100 is dustproof and water resistant. It works up to 70 hours using two AA alkaline batteries and features an automatic shutoff to conserve battery.

Features:

• Fine, medium, coarse selectable accuracies
• 11 display channels on LCD, 5 on LED's
• 45-degree reception area
• 2-inch capture height
• Rod clamp with bubble vial
• Strobe light rejection filter
• Three bright LED indications
• Beam finding beeps twice when receiver passes through the laser beam
• Last beam strike memory
• Level vial ensures good alignment
• Audio indication for noisy jobsites
• Automatic shutoff after 30 minutes
• 70-hour battery life
• Dual graphic LCD display
• Water resistant and dustproof to IP67
• Low battery alert

What's In The Box:

• (1) AGL LS100 laser receiver 1-08942
• (1) Rod clamp
• (1) AA alkaline batteries
• (1) User manual

Brochure/Datasheet

---

Instruction manual

Catatan: Harga tidak mengikat, sewaktu waktu bisa berubah tanpa pemberitahuan dahulu