Fluke Calibration 9170 [9170-A-R-256] Field Dry-Well Metrology Temperature Calibrator with Model 9170-INSA ("A" Insert), INSX and Reference Thermometry, -45 to 140°C (-49 to 284°F)

The Fluke Calibration 9170AR256 Field Dry-Well Metrology Temperature Calibrator with Model 9170-INSA ("A" Insert), INSX and Reference Thermometry, -45 °C to 140 °C lets you bring lab-quality performance into whatever field environment you might work in. New analog and digital control techniques provide stability as good as ±0.005 °C. And with dual-zone control, axial (or "vertical") uniformity is as good as ±0.02 °C over a 60 mm (2.36 in.) zone.

There are six critical components of performance in an industrial heat source (which the European metrology community explains, for example, in the document EA-10/13): calibrated display accuracy, stability, axial (vertical) uniformity, radial (well-to-well) uniformity, impact from loading, and hysteresis. Fluke Calibration added a seventh in the form of a legitimate reference thermometer input and created an entirely new product category: Metrology Wells..

Features:

• Features INSX reference thermometry
• 9170
• Temperature range (at 23 °C ambient): -45 °C to 140 °C (-49 °F to 284 °F)
• Display accuracy: ±0.1 °C full range
• Stability: ±0.005 °C full range
• Axial uniformity: ±0.1 °C at -45 °C; ±0.04 °C at -35 °C; ±0.02 °C at 0 °C; ±0.07 °C at 140 °C
• Radial uniformity: ±0.01 °C full range
• Built-in reference input:
• Temperature range: -200 °C to 962 °C (-328 °F to 1764 °F)
• Resistance range: 0 Ohm to 400 Ohm, auto-ranging
• Characterizations: ITS-90 subranges 4, 6, 7, 8, 9, 10, and 11 Callendar-Van Dusen (CVD): R0, α, β, δ
• Resistance accuracy: 0 Ohm to 20 Ohm: 0.0005 Ohm; 20 Ohm to 400 Ohm: 25 ppm
• Immersion depth to 203 mm (8 in.)
• Combines bath-level performance with dry-well functionality and legitimate reference thermometry
• Bring lab-quality performance into whatever field environment you might work in
• 9170-INSA
• Six imperial miscellaneous holes
• Hole quantities and sizes: 3 Holes, 1/4 in.; 1 Hole, 3/16 in.; 1 Hole, 3/8 in.; 1 Hole, 1/8 in.
• Removable inserts sized for probes with named diameter
• Use additional inserts to broaden range of hole sizes available
• For use with Model 9170

What's In The Box:

• (1) "A" Insert
• (1) Power Cord
• (1) RS-232 Cable
• (1) Getting Started Guide
• (1) User Manual
• (1) Report of Calibration and Calibration Label
• (1) DIN Connector
• (1) Well Insulator
• (1) Insert Removal Tool
• (1)9930 Interface-it Software

Brochure/Datasheet

Instruction manual

---

Catatan: Harga tidak mengikat, sewaktu waktu bisa berubah tanpa pemberitahuan dahulu