This charger is designed to maintain a full and continuous charge on sealed lead-acid batteries. The
battery is initially bulk-charged up to the over-charge voltage of 14.2 volts using the maximum
available output current from the charger. Once this voltage is reached, the charger switches to voltage
regulator mode, maintaining the float voltage of 13.8 volts across the battery with a trickle charge and
supplying load currents up to the maximum available output current. Should the battery voltage fall
below the threshold voltage of 12.8 volts, the charger reverts to bulk-charge mode until reaching the
over-charge voltage again.
This charger is specially designed for use with solar panels although it works well with any DC input
voltage up to 30 volts. It will not drain any current when left connected to the battery if there is no
input voltage such as, a solar panel at night or an AC to DC converter during a power outage.
Notes: (1) The maximum power dissipation of the charger is 10 watts. Supplying large charge currents with
high input voltages for extended periods of time may result in damage to the output driver. (2) The heatsink has a positive voltage applied to it. No damage will happen to the charger and no
current will be drained from the battery if the heatsink is shorted to ground or another DC voltage
source but no charging will occur either. No bare metal or wiring should be left in contact with the
heatsink for extended periods of time.
Features:
Input Voltage: 15-30VDC
Output Float Voltage: 13.8VDC
Over-Charge Threshold Voltage: 14.2VDC
Bulk-Charge Threshold Voltage: 12.8VDC
Maximum Output Current: 0.75A
Power Dissipation: 10 Watts
Supply Current: <2.5mA
Leakage Current, Input Voltage = 0: <1uA
Maximum Power Dissipation: 10 Watts
What's In The Box:
(1) Smart Battery Charger
Brochure/DatasheetInstruction manual
Catatan: Harga tidak mengikat, sewaktu waktu bisa berubah tanpa pemberitahuan dahulu