Gratis Pengiriman
Support Handal
Dapatkan penawaran gratis
0 item(s) - Rp.0 0

  • Daftar belanja Anda kosong!

0

Graigar Fluke 773 [GR-773] Digital Clamp Meter

Graigar Fluke 773 [GR-773] Digital Clamp Meter
Graigar Fluke 773 [GR-773] Digital Clamp Meter
from
Rp.22.850.000
Sebelum Pajak: Rp.22.850.000
Graigar (Shenzhen China) Graigar (Shenzhen China)
+ Keranjang
Tambah ke Favorit Bandingkan produk ini
Tags/penandaan: Fluke , Basic , Battery , Analyzer

The High accuracy Digital Clamp meter Fluke 773 Voltage Source Calibration Loop.

Features:

  • Best in class 0.2% accuracy
  • 0.01 mA resolution and sensitivity
  • Measure 4 to 20 mA signals without “breaking the loop”
  • Measure mA signals for PLC and control system analog I/O
  • Dual backlit display with both mA measurement and percent of 4 to 20 mA span
  • Measurement Spotlight illuminates hard to see wires in dark enclosures
  • Detachable clamp with extension cable for measurements in tight locations
  • Measure 10 to 50 mA signals in older control systems using the 99.9 mA range
  • Automatically change the 4 to 20 mA output for remote testing
  • Power saving features, auto-off, backlight timeout extend battery life
  • Hold function captures and displays changing measurements
  • Measure 4 to 20 mA signals with in-circuit measurement
  • Simultaneous mA in-circuit measurement with 24V loop power for powering and testing transmitters
  • Source 4 to 20 mA signals for testing control system I/O or I/Ps
  • mA output linear ramp or 25% step output
  • Automatically change the 4 to 20 mA output for remote testing
  • DC voltage measurement to verify 24V power supplies or voltage I/O signals
  • Source DC voltage to test input devices that accept a 1-5V or 0 to 10V signals
  • Scaled mA output provides a continuous mA signal that corresponds to the 4 to 20 mA signal
      measured by the mA clamp
  • Enables milliamp signal logging to a separate logging device without breaking the loop
  • Output mA signal enables a logging DMM or other device to record the 4- to 20 mA signal
      without breaking the loop
  • mA in/out: simultaneously measure the mA signal with the clamp and source a mA signal
  • Apply a mA input signal to a device and measure its’ 4-20 mA output on devices such as valves or mA isolators
  • Voltage output linear ramp or 25% step output
  • Automatically change the voltage output for remote testing

What's In The Box:

  • (4) AA alkaline batteries (installed)
  • (1) Soft carrying case
  • (1) TL75 test leads
  • (1) AC 72 detachable clip
  • (1) TL 940 mini hook test leads
  • (1) Instruction sheet
  • (1) Hanging tool with hook and loop strap

Brochure/Datasheet

Instruction manual

Catatan: Harga tidak mengikat, sewaktu waktu bisa berubah tanpa pemberitahuan dahulu