Graphtec GL100 [GL100-WL-DPA-AC100A] Wireless Data Logger with AC Current Sensor with Max 100A Current Sensor

The Graphtec GL100-WL-DPA-AC100A is a set that comes with the GL100-WL Wireless compact Data Logger as well as the GS-DAP-AC AC Current Sensor Adapter, and the GS-AC100A AC Current Sensor. Its body allows users to switch sensors and terminals for measuring various signals. The main body dimension is a slight 2.6 in. wide x 3.93 in. tall x 1.06 in. thick (66 mm x 100 mm x 27 mm).

The GL100-WL wireless datalogger main body has WLAN capability in setting the instrument as a terminal (or a node) in a network or as a wireless hot spot access point. This enables wireless access from notepad PC or smart pad/smartphones using only its IP address to read the real-time monitoring data and to download data from its internal memory. Additionally, the wireless LAN capability allows three different configurations for the wireless remote access.

One GL100-WL main body will be able to wirelessly send information to the GL240 for four channels of direct real time monitoring and recording on the GL240. Up to 5 GL100-WL main bodies will be able to send up to 20 channels of information over to the GL840-M/GL840-WV via the wireless connection using the GL840 as the access point hub to gather all data from the GL100s in the same network.

Powered by two AA batteries (not included) or USB bus power (included MicroB-A USB cable). With an on-board memory of 4.9 MB and external memory via Micro SD card slot, the GL100 body also includes one USB port (Micro B connection).

The display of the GL100WLDPAAC100A is a backlit monochrome with 128×64 dot resolution displaying measured values and settings. Recorded data is not displayed on the main unit; Captured data can only be displayed on PC using included application software.

The GS-DAP-AC is an AC current sensor adapter that can connect with up to 2 sensors simultaneously, and can be connected to the GS-TH(not included with the GL100-WL-CO2-DPA-LXUV), the GS-CO2, and the GS-LVUX.

The included GS-AC100A AC current sensor is 1 of 3 current sensors that can be connected to the GS-DAP-AC adapter and is rated at 100 A AC in current measurements.

Graphtec GL-Connect application is now available for the iOS and Android OS platforms. Type in "Graphtec" on the Apple iTunes Store or the Android apps on Google Play to find the app, or click on the links below.

---

Features:

---

• This set comes with the GL100-WL Wireless Data Logger, the GS-DAP-AC AC Current Sensor Adapter, and

      the GS-AC100A AC Current Sensor

• GS-DAP-AC can connect up to 2 of the GS-TH, GS-CO2, or GS-LXUV
• GS-DAP-AC Current Sensor Adapter is not able to connect two sensors of the same type.
• GS-AC100A has a rated measuring current of 100 A AC
• Standards: IEEE802.11b
• Communication distance: 40 m
• Able to interface with Android or iOS smart device
• Supports a variety of measurements by exchanging the input module
• Real-time data capturing
• Display the captured data value to the LCD in real-time and save the monitoring values
• PC and smart mobile device software available
• Industry-specific software: agriculture, logistics, power
• Built-in memory: 4.9 MB
• microSD memory card port

---

What's In The Box:

---

• (1) GL100-WL Wireless LAN Data Logger
• (1) Quick Start Guide
• (1) CD-Rom
• (1) USB Cable
• (1) 100AC AC Current Sensor
• (1) Current Sensor Adapter

---

Brochure/Datasheet

---

Instruction manual

---

Note: Prices are not binding , subject to change without prior notice