Ametek RTC-700-A Reference Temperature Calibrator, 33˚C to 700˚C (91˚F to 1292˚F), Basic Version without Input. The Ametek RTC-700 is an advanced reference temperature calibrator that offers high performance along with a full range of features. The Ametek RTC-700 has a wide temperature range and provides precise temperature calibration of sensors, regardless of type and format, through an innovative triple-zone heating technology. The Ametek RTC-700 has a temperature range of 33° to 700°C (91° to 1292°F). The unit has three heating zones, each of which is independently controlled for precise temperature calibrations. The homogeneity of the lower zone is close to that of a laboratory liquid bath. The lower and middle zones ensure optimum heat dissipation throughout the entire calibration zone. The upper zone compensates for heat loss from the sensor- under- test as well as from the open top. This eliminates the need for extra insulation of sensors-under-test and makes it possible to calibrate liquid-filled and other sensors. The RTC-700 offers a further improvement on this technology with its Dynamic Load Compensation (DLC) sensor which measures the temperature in the calibrator's insert and provides feedback to the active triple-zone system to compensate for the temperature differences resulting from testing various sensors. This allows the RTC-700 to perform highly accurate temperature calibrations without being affected by the size and number of sensors under test. The RTC-700 also offers other innovative features such as intelligent sensors for plug ‘n' play connectivity, an easy-to-read full-color VGA display, and a USB connection for improved communications and software downloads. The Ametek RTC-700 reference temperature calibrator is available in three configurations: RTC-A reference temperature calibrator, RTC-B reference temperature calibrator with input for reference sensor, DLC sensor and sensors-under-test, and RTC-C reference temperature calibrator with input for reference sensor and DLC sensor. The RTC-700 can be used without an external reference sensor. However, users will obtain better accuracies and realize the calibrator's full potential by utilizing the STS-200 reference sensor. Both the STS-200 and DLC sensors contain all individual calibration data regarding the sensor, allowing users to change the reference sensor and be up and running immediately. The RTC-700 features a rugged, lightweight design and inserts that cover most commonly used sensor sizes. A unique design allows the units to calibrate threaded sensors and sensors with connection heads.
Instrument in Carrying case & packaging: 27.3 kg/60.2 lb
Dimensions (LxWxH):
Instrument : 362x171x421 mm
Carrying case: 470x350x600 mm
Instr. & Carrying case: 470x350x600 mm
Instr. & packaging : 442x251x481 mm
Instr., Carrying case & packaging: 550x430x660 mm
INSERTS:
Insert dimensions:
RTC-700 outer diameter : 29.8 mm/1.17 in
RTC-700 inner diameter: 25.6 mm/1.01 in
RTC-700 length: ....210 mm/8.27 in
Weight of non-drilled insert (approx.):
RTC-700 : 1060 g/37.3 oz
Use of other inserts may reduce performance of the calibrator. To get the best results out of the calibrator, the insert dimensions, tolerance and material is critical. We highly advise using JOFRA inserts, as they guarantee trouble free operation.
Model A, B and C:
(1) RTC dry-block calibrator (user specified)
(1) Mains power cable (user specified)
(1) Traceable certificate - temperature performance
(1) Tool for insertion tubes
(1) Heat shield
(1) JOFRACAL
(1) USB cable
(1) Manual
Model B instruments contain the following extra items:
(1) Test cables (2 x red, 2 x black)
(1) Traceable certificate - input performance for reference sensor and DLC sensor