Accurate up to 3,000 feet, the Spectra GL710 is an automatic, self-leveling single grade construction laser suitable for site preparation, trenching, pipe laying and machine control. The GL710 laser level features -0.5 to 25% grade range on a single axis and self-levels to 10%, making it ideal for general construction applications. You can mount this device on a 5/8-11 tripod.

The Spectra Precision GL710’s large alphanumeric display is visible from the ground even on ten feet tripods. It also has active temperature compensation to give accurate, stable results regardless of temperature changes.

With fully sealed aluminum housing and protective lens hood, the GL710 laser is dustproof and water resistant. It also has a battery life indicator and operated sleep mode that saves power during breaks. This grade slope laser uses NiMH rechargeable batteries.

HL700 Laser Receiver 
Ideal for use with any rotating Spectra grade laser, the HL700 laser detector features a digital readout of elevation that provides a numeric display of +/-2 inches. The readout is displayed on the large front and rear LCDs and shows exactly how far the elevation is from on-grade. Accurate measurements can be made without moving the rod clamp and selectable units of measure can be displayed in millimeter, centimeter, feet, inches or fractional inches. With a large five-inch reception height, the Spectra HL700 laser detector acquires the beam quickly and makes it easy to stay on the beam. 

Features:

• Up to 3,000-foot operating range
• ±1/16 inch accuracy at 100 feet
• Self-leveling
• Single grade from -0.5 to +25%
• Automatic temperature compensation 
• Selectable rotation speeds
• Ideal for machine control
• Fully sealed aluminum housing
• Protective lens hood
• Large alphanumeric display
• 5/8-11 tripod thread
• Unmatched beam stability
• Intuitive, simple controls

What's In The Box:

---

• CTO-GL710: With HL700 Laser Receiver 
  
• (1) GL710 Single Grade Laser
• (1) HL700 Laser Receiver
• (1) Clamp C70 for clamping Laser Receiver Grade Rod
• (1) Charger w/ Cable 
• (6) D-Cell NiMH Batteries
• (1) Carrying Case
• (1) Operating Manual
• CTO-GL710-10: With CR600 Laser Receiver
• (1) GL710 Single Grade Laser
• (1) CR600 Laser Receiver
• (1) Clamp C70 for clamping Laser Receiver Grade Rod
• (1) Charger w/ Cable 
• (6) D-Cell NiMH Batteries
• (1) Carrying Case
• (1) Operating Manual

Brochure/Datasheet

---

Instruction manual

---

Note: Prices are not binding , subject to change without prior notice