• Supports 2, 3 and 4 point testing
• Stakeless testing capability enables instrument to be used as a clamp-on tester
• ART (Attached Rod Technique) capability allows testing without disconnecting of utility connection
• Multiple, user-selectable test frequencies allows for most effective testing
• Rugged, IP54-rated case suitable for outdoor environments
• Clear, unambiguous warning indicators help prevent test failure and reduce test time
• Simple to use, one-touch operation improves efficiency
• Measures resistivity of any type of soil with measurement range up to 200,000 ohms
• User-selectable test voltage ensures units can be used in agricultural environments
• Microprocessor control allows for improved error detection
• Backlit LCD allows for testing in dark environments
• Performs accurate testing in noisy environments by rejecting noise up to 40V peak to peak
• Voltmeter enables measurements of ground voltage and increases operator safety
• Accuracy of 2% of reading enhances reliability of measurements
• Rated to CAT IV 100V

• Resistance range: 0.01Ω to 200kΩ autoranging
• Analog model: 2.5% of scale length
• Digital models:
• 2P measurements 2% ±3 digits
• 3P measurements 2% ±3 digits
• 4P measurements 2% ±3 digits
• ART measurements 5% ±3 digits
• Stakeless measurements 7% ±3 digits
• Maximum probe resistance:
• Rp limit: 100k½ (50V output voltage)
• Rc limit: 100k½ (50V output voltage)
• Limits reduced to 50k½ for 25V output voltage
• Limits reduced to 5k½ for 0.01 ½ resolution
• Earth voltage range: 0 – 100 V
• Earth voltage: accuracy: 2% ±2 V
• 2-wire test: Yes, all models
• 3-wire test: Yes, all models
• 4-wire test: DET4TD, DET4TC2, DET4TCR2
• ART (Attached Rod Technique): DET3TC, DET4TC2 and DET4TCR2
• Ground current range (with current measuring clamp): 0.5 mA to 19.9 A
• Ground current accuracy: 5% ±3 digits
• Display: LCD (moving coil meter for analog model)
• Test frequency: 128 Hz
• Test voltage: 25 V or 50 V, user selectable (factory setting 50 V)
• Test current: 450 micro-amps at 25 V or 50 V (selectable), 4.5mA at 25 V
• Noise rejection: 40V pk to pk
• Noise check: Automatic (by selector switch DET3TA)
• C spike check: Automatic (by pushbutton DET3TA)
• P spike check: Automatic (by pushbutton DET3TA)
• Maximum current loop resistance: 100 k-ohms at 50V, 50 k-ohms at 25 V and 5 k-ohms for 0.01 ohm resolution for readings below 19 ohms
• Maximum voltage probe resistance: 100 k-ohms at 50V, 50 k-ohms at 25 V and 5 k-ohms for 0.01 ohm resolution for readings below 19 ohms
• Battery type: 8 1.5 V AA cells (8 1.5 V AA NiMH rechargeable cells – DET4TCR2)
• Battery life: 3 hours, 700 consecutive tests
• Safety: EN61010-1 CAT IV 100 V
• Terminals: 4 mm plug type (test leads)
• Ingress protection: IP54
• EMC: Meets the requirements of EN61326-1:1998 for use in heavy industrial areas
• Dimensions: 8 x 5.7 x 3.2 in. (203 x 148 x 78 mm)
• Weight: 2.2 lb (1 kg)
• Operating temperature range: -.5º to +131º F (-15º to +55º C); DET3TA: -4º to +122º F (-20º to +50º C)
• Storage temperature range: -40º to +158º F (-40º to +70º C)
• Humidity: 95% RH non-condensing at 104º F (40º C)

• (1) DET4TC2 Ground Resistance Tester (1000-345)
• (1) Hard Carrying Case
• (4) Test Leads (49 ft, 33 ft, 33 ft, 10 ft)
• (1) Set of Spikes
• (8) AA Alkaline Batteries
• (1) Certificate of Calibration

Brochure/Datasheet

Instruction Manual

Download

Note: Prices are not binding at any time subject to change without prior notice