TSI Alnor 6200D LoFlo Balometer Capture Hood With 2' x 2' (610mm x 610mm) Hood

The TSI Alnor 6200 LoFlo balometer is a compact instrument that measures very low air flow rates in HVAC systems. The 6200 measures air flow from 10 to 500 cfm (17 to 850 m3/h; 4.7 to 236 l/s) with an accuracy of ±(3% + 5 cfm). The TSI Alnor LoFlo displays standard air volume rate when placed at supply or return diffusers, registers, or grilles located on the ceiling, wall, or floor.

A vent mechanism is used by TSI Alnor 6200 LoFlo balometers to reduce the restriction of air flow caused by the instrument. This unique venting system allows the 6200 to remain compact while still measuring a wide range of volume rates. The TSI Alnor LoFlo should be used with the vents closed at lower volume rates, but higher volume rates should be measured with the vents open to minimize any resistance effects. A 2-point measurement may be taken to compensate for the resistance effect of the instrument at higher volume rates.

The TSI Alnor 6200 LoFlo balometer is battery powered and may be used with or without optional hoods. It weighs just over 6 pounds with the optional 2' x 2' hood, helping to reduce worker fatigue. The TSI Alnor 6200 ships complete with batteries, carrying case, NIST calibration certificate and manual.