The Solinst AquaVent records accurate water level and temperature measurements in shallow groundwater and surface water applications. It combines pressure and temperature sensors, hydrophobic filters and datalogger within a 7/8" x 7" (22 mm x 178 mm) stainless steel housing.

The AquaVent uses a gauged pressure transducer; it is open to the atmosphere via a vented cable to surface. Atmospheric pressure is applied to the transducer diaphragm, providing a cancellation effect for barometric pressure. This results in actual water level recordings.

The vented cable and Solinst AquaVent logger are protected from moisture by built-in desiccants and hydrophobic filters.

The vented pressure transducer is made of Hastelloy®, making it extremely durable and accurate in a wide range of temperature and monitoring conditions. The sensor provides an accuracy of 0.05% FS, and can withstand 2 times over-pressure without permanent damage.

The robust FRAM memory can hold up to 120,000 data sets when programmed in Solinst Levelogger® Software with a compressed linear sampling mode.

Flexible Datalogger Communication Options
The AquaVent has options for communicating strictly with Solinst software and accessories, or integrating into a telemetry system, SCADA/PLC system or a third-party datalogger.

The AquaVent can communicate with Levelogger Software. It can be used with the Solinst Levelogger App and Interface, and the DataGrabber™.

For deeper, hard to access applications, or areas that are humid or prone to flooding, the Levelogger Edge absolute pressure water level datalogger is also an option (see Model 3001 Levelogger Edge Data Sheet). 

Features:

• Gauged pressure sensor for highly-accurate water level measurements: 0.05% FS
• Multiple built-in hydrophobic filters and desiccants — no need to replace, reduces maintenance
• Easy-to-access, user-replaceable batteries in Wellhead
• Options for MODBUS (RS-232/RS-485) and SDI-12
• Separate cables for each communication protocol
• Use with Solinst software for multiple logging options including linear, event, and scheduled sampling
  

Applications

---

• Ideal for shallow applications: up to 65 ft (20 m) submergence
• Aquifer characterization: pumping tests, slug tests, etc.
• Stream gauging, lake and reservoir management
• Watershed, drainage basin and recharge monitoring
• Stormwater and runoff monitoring
• Long-term water level monitoring in wells and surface water
  

What's In The Box:

---

• (1) Solinst AquaVent 3500 Vented Water Level Logger
• Required Items:
  
• Cable assembly
  
• Communication wellhead
  

Brochure/Datasheet

Instruction manual

---

Catatan: Harga tidak mengikat, sewaktu waktu bisa berubah tanpa pemberitahuan dahulu