Stuart CD162 [CD162] Stirrer Hotplate Ceramic 230V

Sophisticated stirrer hotplates offering digital control of both temperature and stirring speed. Comes complete with a detachable PTFE coated probe which when immersed in a liquid sample can very accurately control its temperature to within ±0.5°C even over a very long period of time.

As the hotplate heats the sample to the set temperature, the advanced microprocessor automatically measures the rate of temperature rise to judge the capacity and nature of samples (e.g. oil or aqueous). It then optimises the heating rate to minimise overshoot and time to set point. An audible alert sounds when the set temperature has been reached.

Both set and actual temperature of the sample are displayed simultaneously on a bright, easy to read vacuum fluorescent display. For maximum security, an independent safety circuit automatically sets to 20°C above the set temperature and shuts off the heater if the temperature exceeds this. Therefore, the hotplate is safe to leave on continuously, even unsupervised e.g. overnight.

Stirring action gives much better temperature uniformity within samples because the liquid is mixed effectively. Powerful magnets and motor give stirring speeds up to 1300rpm and volumes up to 15 litres*.

Stirring speed is set and displayed digitally so that exactly the same speed can be used each time for reproducibility.

If the probe is unplugged, the temperature of the top plate can be set on the display. This can be useful for applications where accurate surface temperature is important such as warming microscope slides, microarrays and specialist electronics.

There are two models to choose from:

Model CD162 has a glass ceramic top plate, which is chemically resistant and gives very fast heat up times.

Model SD162 has an aluminum / silicon alloy top plate which gives a very even plate temperature and quick response to changing set temperature.

Features:

---

• Digital setting & control of temp & speed
  
• Aluminium or ceramic top plate
  
• Independent safety circuit to protect against overheating
  
• Light flashes “HOT” when ring is heated
  
• Complete with PTFE temperature probe for accurate control
  
• Plate dimensions (WxD) 160 x 160mm
  
• Heated Area (WxD): 160 x 160mm - SD162 model/ 120 x 120mm - CD162 model
  
• Heater power 700W (SD162) / 500W (CD162)
  
• Heater display resolution 1ºC
  
• Max liquid temperature with probe 200ºC
  
• Control accuracy with probe ±0.5ºC
  
• Stirrer speed 200 - 1300rpm
  
• With BioCote antimicrobial protection
  

What's In The Box:

---

• (1) Main unit
  
• (1) PTFE coated probe and 2 x 25mm
  
• (1) PTFE coated stirrer bars
  
• (1) Retort rod
  
• (1) Power cable
  
• (1) User Manual
  
• (1) 230V, 50Hz plug
  

Brochure/Datasheet

---

Instruction manual

Catatan: Harga tidak mengikat, sewaktu waktu bisa berubah tanpa pemberitahuan dahulu